home *** CD-ROM | disk | FTP | other *** search
- THE WALL Revision 4 - (c) 1996, Robert Thomson
-
- ====
- This is just a quick start guide, it is recommended that you read
- THEWALL.DOC, even if it's just to read my notes or messages, etc.
-
- ====
- You will have to edit "THEWALL.CFG" and place it in your maximus directory.
- (Current directory when running the MEX)
-
- ====
- If you are going to modify the WALLHEAD (Wall Header) files, take note of the
- [menu] up the top of the .MEC and the [link] down the bottom, as these give
- the warning and link to the actual wall.
-
- ====
- All you need to do to get this WALL running after changing the directories in
- THEWALL.CFG is add it to a menu in Maximus.
-
- NOTE: If you are not compiling in the \MAX\M directory, you will need to have
- the mex_include environment variable set. (ie. set mex_include=c:\max\m)
-
- Add these two lines to a menu in menus.ctl:
- Display_File utils\wall\wallhead Normal "Read THE WALL"
- MEX utils\wall\thewall Normal "Write on THE WALL"
-
- ^^^^^^^^^^ should point to the path you installed it in..
-
- You will need to modify your "wallhead.mec" file so that the [link] statement
- down the bottom points to the valid "WALLDISP.BBS" file.
-
- ====
- Enjoy THE WALL,
- Robert Thomson
-
-